Application

• Fully digital user programmable injector system for contrast media in the field of computed tomography and phlebography 

Injector concept

• Compact injector controlled by microprocessor
• The head of the injector contains the mechanical drive mechanism and the control electronics
• Integrated heated syringe holder with Easy Loading Syringe (ELS) 200 ml
• Keypad with LC-Display on upper side of injector head

Mechanical design

• Injector head attached to mobile stand via pivotal arm
• Operational angle of about 15° below horizontal
• Tilt through 90° to vent system
• Can be detached from the stand in few movements
• Handswitch to activate injection (5 m cable)
• Total weight about 22.5 kg

Power supply

• 230 V/50-60 Hz, optional 115 V/50-60 Hz
• Max. power consumption: 130 VA
• 5 m cable

Memory capacity

• The user can define and save up to 99 protocols

Filling of injections syringes

• Automatic filling via menue with volume input or
• Manual filling with variable speed

Injection parameters

Maximum injection volume

• 200 ml

Partial injection volume

• 1 - 200 ml

Maximum pressure

• 21 bar (304 psi)

Flow rate

• 7.5 ml/s, programmable with steps up to 0.1 ml/s

Number of phases

• 1 to 3

Injection delay

• 1 - 200 sec.

Phase delay

• 1 - 200 sec.

Scan delay

• 1 - 240 sec.

Options

• Remote control
• Wall or ceiling mounted support
• Adaptor for prefilled and hand-hold syringes incl. software update Adaptor for 50 ml phlebography syringes

Subject to technical alteration